HC Products Stealth-Flex Perimeter Protection
High Security
Easy to Install
High Security
Multiple Applications
Airports, Water Treatment Plants, Mini-Storage, Prisons, Car Lots, Homes.
The Stealth-Flex System combines high security protection at an affordable cost for a wide range of applications.
About Stealth-Flex
The Stealth-Flex Fence Protection System consists of a sensitive cable, using state of the art microphonic technology to provide detection of intruders' attempts to climb or cut the fence. The cable is resistant to false alarms from environmental influences and unaffected by heat, UV light and moisture.
Stealth-Flex microphonic cable is attached to the fence, using simple cable ties. The analyzer is available in a NEMA standard environmental housing for attachment directly to a fence post or in a sturdy metal can for indoor installation. On detecting an alarm condition, the analyzer activates a Form C relay which can be connected to any alarm panel, cellular transmitter or other device.
The analyzer's sophisticated electronics allow simple but precise adjustment of sensitivity to meet the requirements of any installation. The Stealth-Flex system is ideal for high security applications, while its low cost and simplicity of installation allow its use in a variety of locations not previously considered for this kind of protection.

Simple to Install
The Stealth-Flex is available as a complete kit, protecting 500 feet (SF-500),1000 feet (SF-1000) or 2000 feet (SF-2000). The kit includes cable, analyzer(s) and end-of-line termination kit. The cable is easily fixed to the fence, using cable ties, permitting a much faster installation than shock sensor based systems. Sensitivity and pulse count adjustment is facilitated by a bar display.

High Security
Stealth-Flex detects attempts to climb, cut or otherwise damage the fence. Cutting the cable itself will generate a tamper or intruder alarm.

Tried and Tested
Stealth-Flex microphonic cable protects many high security locations, both government and commercial around the world.
The analyzer is available in a NEMA standard environmental housing for attachment directly to a fence post.
Specification Sheet
Email this page
A typical Stealth-Flex installation consists of sensitive cable, one or more analyzer units and one or more end of line termination kits. The system requires a clean linear 12V DC power supply.

Installations of less than 1,000 feet of sensitive cable require a single zone analyzer (AN-1000) located at one end of the cable. The analyzer may be indoors, in which case a length of non-sensitive coax cable is connected between the end of the sensitive cable, or outdoors, fixed to a fence post or other suitable location. On detection of an alarm, the analyzerís Form C contact will change state. This contact is typically connected to a control panel zone and the system is armed and disarmed by means of the control panel.

Installations of more than 1,000 feet require a dual zone analyzer (AN-2000). This is typically located where up to 1,000 feet of sensitive cable can be led in each direction along the fence. If access to gates is required while the system is armed, a bypass switch may be required. The BPS-1 allows the gate to be bypassed manually.
1000 FT KITS
SF-1000
Kit for 1000 feet. Includes 1000 feet of sensitive cable, single zone analyzer in 7 x 8 x 3.5 inch metal can, end of line termination kit.
SF-1001 As SF-1000, analyzer mounted in NEMA-4 standard outdoor box.
SF-1000DZ Kit for 1000 feet. Includes 1000 feet of sensitive cable, dual zone analyzer in 11.25 x 11.25 x 3.5 inch metal can, end of line termination kit.
SF-1001 As SF-1000, analyzer mounted in NEMA-4 standard outdoor box.

2000FT KITS
SF-2000
Kit for 2000 feet. Includes 2000 feet of sensitive cable, dual zone analyzer in 11.25 x 11.25 x 3.5 inch metal can, end of line termination kit.
SF-2001 As SF-2000, analyzer mounted in NEMA-4 standard outdoor box.

500FT KITS
SF-500
Kit for 500 feet. Includes 500 feet of sensitive cable, single zone analyzer in 11.25 x 11.25 x 3.5 inch metal can, end of line termination kit.
SF-501 As SF-500, analyzer mounted in NEMA-4 standard outdoor box.
Stealth-Flex Systems
HC Security Products
MADE IN AMERICA MAKES A DIFFERENCE!
877-908-CCTV(2288)
Email: orders@hcproductlines.com
877-908-CCTV(2288)
Copyright © 1987 - 2012 "HiTech Circuits, Inc." All Rights reserved